JUKI HZL-NX7 Instruction Manual page 104

■ Changing the tapering size
❶
❷
102
It is possible to change the size of tapering sections ( ❶ , ❷ )
according to the product you want to sew.
Setting range: "×1" - "×5"
* Initial value has been factory-set to "×3".
1. Invert the pattern. Then, press
2. Press
3. Select the size of tapering.
Shortened
Size 1
The set value is confirmed by pressing
.
.
Standard
Lengthened
value
The size of tapering will be returned to its initial value by
pressing the blue frame.
The initial value is also restored by pressing
2 3 4 5
.
.