4.4. Changing the presser foot
■ Removing and installing the
presser foot
❶
A
❹
■ Removing and installing presser foot holder
❷
❶
❷
20
❷
❸
❶
❸
Leave the machine in Lock mode
● Removing presser foot
Raise the needle.
Move up the presser foot lifting lever.
Press the presser foot releasing button ❶ to remove the
presser foot.
● Installing presser foot
Align the pin ❷ of the presser foot and the groove ❸ in
the presser foot holder.
Move down the presser foot lifting lever.
* Each presser foot has a marking ❹ . Use the appropri-
ate presser foot for the stitch pattern to be sewn.
● Removing presser foot holder
Lift the needle and presser foot lifting lever.
Loosen the setscrew ❶ of the presser foot holder to the
left and remove the presser foot holder ❷ .
● Installing presser foot holder
Align the screw hole at the presser bar ❸ with the hole of
presser foot holder ❷ (long groove).
Tighten the setscrew ❶ firmly by turning it to the right
side.