Welt Seam; Decorative Stitches And One Point Pattern - JUKI HZL-G220 Instruction Manual

Welt seam

Turn OFF the power switch before
Attention
replacing the presser foot.
This stitch is used for securing an edge.
1
Fabric
(wrong side)
Finish line
Put the fabrics together and sew.
2
Cut half of the seam allowance.
3
Fabric
(wrong side)
Open the fabrics from the finish line and fold the
seam allowance together and iron.
4
Fabric
(wrong side)
Wrap up the shorter seam allowance with the
longer one and sew the edge of the crease.
38
Pattern
Practical 00
No.
Presser Standard
foot presser foot (A)
1.5 cm
0.7 cm
Decorative stitches and one point
pattern
Turn OFF the power switch before
Attention
replacing the presser foot.
After selecting a pattern, push memory button
that one point pattern can be sewn.
If memory button will not be pushed, machine sews the
pattern continuously.
Place the fabric under the presser foot and start.
Display of the length of one cycle
Although the length of one cycle of the decorative pattern
is displayed, treat it only as a reference, as this will be
changeable based on fabric and thread.
Example)
The length of one cycle
is displayed.
Stitch length of the
pattern is displayed.
Pattern
One point 00~39
No.
Manual
Presser
buttonhole
foot
presser foot (I)
so
5.8 mm
0.3 mm