④ Foot switch functions
Function can be selected for foot switch.
* Initial value has been factory-set to "Reverse stitch".
* If the foot switch function is set to "reverse stitch" or "lock stitch" while automatic back tacking, thread trimming
and presser foot lifting have been set, it is possible to carry out back tacking, thread trimming and presser foot
lifting at the end of sewing.
⑤ Start-up
It is possible to select whether the pattern and settings that are used immediately before re-turning the power
ON, are retained or initialized.
* Initial value has been factory-set to "Initialize the pattern".
Press
.
Reverse stitch
Lock stitch
Half stitch sewing
One stitch sewing
The set value is confirmed by pressing
Press
.
: Initialize the pattern
: Retain the pattern that is used immediately before
The set value is confirmed by pressing
(Refer to page 17)
Lifting / lowering of
presser foot
Thread trimming
No function
.
.
53