JUKI HZL-NX7 Instruction Manual page 80

(2) Adjusting the darning of combined patterns
○ Correct shape
78
× When right side × When right side
is higher than left is lower than left
side side
Carry out the adjust-
ment while conduct-
ing test sewing by
pressing .
In the case the selected pattern is found to be deformed
during trial stitching...
1. Press .
2. Press .
3. The darning adjustment screen is displayed.
Press .
Carry out the adjust-
ment while conduct-
ing test sewing by
pressing .
Carry out adjustment until the correct-
in-shape pattern can be sewn. Then,
finish adjustment.
The set value is confirmed by pressing
.