Voice Request - Ricoh FAX75 Operator's Manual

8-5 Voice Request
With this feature, you can speak with the remote terminal operator before or after transmis-
sion or reception. You can also interrupt communication to speak to the other party.
For Voice Request to be effective, both terminals must:
Have a telephone or handset connected.
. Have the voice request function.
w
Note:
To speak with the remote terminal operator before sending a message, dial the
remote terminal on the telephone connected to your terminal and proceed as de-
scribed on page 7-4 (Full Telephone Number at the Telephone).
Un
o
0"0
0 "00
~ :+ ~
.."
0.,.,
"o
0000 °0'0
000.
.-.
"-
—Stop key
- VoiceRequestKev
1 To talk with the remote terminal operator at the end of communication.
If you are transmitting:
1) Start the transmission. Wait for the Communicating indicator to light.
2) Press Voice Request.
3) When your machine sounds a tone, pick up the handset, press the Stop key, and
speak.
Note:
If your machine does not sound a tone, the remote terminal operator did not
come to the phone. The line will be disconnected automatically.
4) Replace the handset after speaking.
If you are receiving:
1 ) Press Voice Request while the Communicating indicator is lit.
2) When the machine sounds a tone, pickup the handset, press Stop, and speak.
Note:
If your machine does not sound a tone, the remote terminal operator did not
come to the phone. The line will disconnect automatically.
3) Replace the handset after speaking.
8-14