Table of Contents
Advertisement
3, Turnaround
Polling
During routine transmission,
If you select this feature, your terminal WIII automatically
poll
the terminal that you are sending to and ask d to send you any documents
that It has on
polling standby (see page 8-11 )
You will have to pay line charges for both the transmission
and reception of the polled
document
However,
the overran line charges are less than for the two calls that would
otherwise be needed for this operation
1 Perform the normal transmission operation.
a) Insert the document
b) Select the appropriate
resolution and contrast
c) Dial the remote terminal
d) Press the Start key
2
When the Communlcatlng
lamp Ilghts on the operation panel, press the Function key
3
As transmission
takes place, the RTI or CSI of the remote machine appears In the dis-
play.
4
After transmission
IS complete,
the display goes blank
The machine goes Into the
polling reception mode
5
The machine emits a tone when reception of the document IS complete
8-13
Advertisement
Table of Contents
