Verifying The Configuration - HP FlexFabric 5700 Series Configuration Manual

# Add the zone alias Alias1 to Zone3 as a member.
[SwitchA-vsan1-zone-Zone3] member zone-alias Alias1
[SwitchA-vsan1-zone-Zone3] quit
# Create a zone set named Zoneset1, and add zones Zone1, Zone2, and Zone3 as its members.
[SwitchA-vsan1] zoneset name Zoneset1
[SwitchA-vsan1-zoneset-Zoneset1] member Zone1
[SwitchA-vsan1-zoneset-Zoneset1] member Zone2
[SwitchA-vsan1-zoneset-Zoneset1] member Zone3
[SwitchA-vsan1-zoneset-Zoneset1] quit
# Configure the zone distribution and merge type as complete.
[SwitchA-vsan1] zoneset distribute full
# Activate a zone set as the active zone set and distribute it to the entire fabric.
[SwitchA-vsan1] zoneset activate name Zoneset1

Verifying the configuration

Verify the configuration on either switch, for example, Switch B.
# Display zone set information for VSAN 1.
<SwitchB> display zoneset vsan 1
VSAN 1:
zoneset name Zoneset1
zone name Zone1
fcid 0x010001
zone name Zone2
fcid 0x010002 initiator
pwwn 11:22:33:44:55:66:77:88 target
zone-alias Alias1
fcid 0x020004 target
pwwn 22:33:44:55:66:77:88:99 target
zone name Zone3
fcid 0x010003 initiator
zone-alias Alias1
fcid 0x020004 target
pwwn 22:33:44:55:66:77:88:99 target
# Display information about the zone Zone2 in VSAN 1.
<SwitchB> display zone name Zone2 vsan 1
VSAN 1:
zone name Zone2
fcid 0x010002 initiator
pwwn 11:22:33:44:55:66:77:88 target
zone-alias Alias1
fcid 0x020004 target
pwwn 22:33:44:55:66:77:88:99 target
# Display information about all zone aliases.
<SwitchB> display zone-alias
VSAN 1:
91