Verifying The Configuration - HP FlexFabric 5700 Series Configuration Manual

# Bind VFC 2 to interface Ten-GigabitEthernet 1/0/2.
[FCF-vfc2] bind interface ten-gigabitethernet 1/0/2
[FCF-Vfc2] quit
# Configure Ten-GigabitEthernet 1/0/2 as a trunk port, and assign the port to VLAN 10.
[FCF] interface ten-gigabitethernet 1/0/2
[FCF-Ten-GigabitEthernet1/0/2] port link-type trunk
[FCF-Ten-GigabitEthernet1/0/2] port trunk permit vlan 10
[FCF-Ten-GigabitEthernet1/0/2] quit
# Enable FCoE for VLAN 10 and map VLAN 10 to VSAN 10.
[FCF] vlan 10
[FCF-vlan10] fcoe enable vsan 10

Verifying the configuration

# Display ENode information obtained by the Transit switch.
[Transit] display fip-snooping enode
VLAN 10:
Interface
XGE1/0/1
# Display FCF switch information obtained by the Transit switch.
[Transit] display fip-snooping fcf
VLAN 10:
Interface
XGE1/0/2
# Display information about FIP snooping sessions.
[Transit] display fip-snooping sessions
VLAN 10:
FCF MAC
0000-1234-0e01
# Display the FIP snooping rules that have been flushed.
Slot 1:
VLAN 10:
FCF rules information:
Interface
XGE1/0/2
ENode rules information:
Interface
XGE1/0/1
ENode WWN
10:00:00:11:22:00:0d:01
FCF MAC FCF WWN
0000-1234-0e01 10:00:00:11:22:00:0e:01 10:0a:00:11:22:00:0e:01
ENode MAC
0000-1234-0d01
Source MAC/Mask
0000-1234-0e01/48
Source MAC/Mask
0efc-0001-0000/48
ENode MAC
0000-1234-0d01
Fabric Name
VN_Port MAC VN_Port WWN
0efc-0001-0000 af:10:01:11:22:00:0d:01
Destination MAC/Mask
0efc-0000-0000/24
Destination MAC/Mask
0000-1234-0e01/48
108
Context
ffffffff
Context
ffffffff
ENode
1