Cisco IE-4000-4TC4G-E Hardware Installation Manual page 50

Where to Go Next
Start the Cisco Network Assistant application, which is described in the Getting Started with Cisco
•
Network Assistant guide. Using the GUI, you can configure and monitor a switch cluster or an
individual switch.
Use the CLI to configure the switch as an individual switch from the console. See the Command
•
Reference on Cisco.com for information about using the CLI.
Start an SNMP application such as the CiscoView application.
•
Start the Common Industrial Protocol (CIP) management tool. You can manage an entire industrial
•
automation system with the CIP-based tools.
Cisco IE 4000 Switch Hardware Installation Guide
2-32
Chapter 2 Switch Installation