Introduction; Specifications - Go Power GP-SW3000 Manual

1. Introduction

The Go Power! Sine Wave series models are used in a wide range of applications
including remote homes, RVs, sailboats, and powerboats. It will operate most televisions
and VCRs, personal computers, small appliances, and tools such as drills, sanders,
grinders, mixers and blenders. The inverter must have a greater power rating than the
load it provides power to. To get the most out of the power inverter, it must be installed
and used properly. Please read the instructions in this manual before installing and using
this model.

2. Specifications

2.1 GP-SW3000 W Inverter
Model
Continuous output power
Surge rating
Output waveform
Output Voltage ± 3%
Output Frequency ± 0.05%
Input voltage
Efficiency
No load current draw / Powersave
Protection
Low battery alarm ± 2%
Low battery shut-down ± 2%
Cooling
AC receptacle
Dimensions (L x W x H)
Weight
Warranty
Inverter Install Kit
Go Power! GP-SW3000, GP-SW2000, GP-SW1000
GP-SW3000 – 12 V
Sine Wave <3% THD
50 / 60 Hz adjustable
10.5-15 VDC
2.0 A / 0.55 A
Overload, over temperature, over voltage, low
voltage, short circuit, reverse polarity (fuse)
10.5 V
≤ 10.0 V
Thermostatically-controlled fan
GP-DC Kit 5
and GP-SW600
Inverter Owner's Manual
GP-SW3000 – 24 V
3000 W
6000 W
115 VAC RMS
21-30 VDC
85-92%
1.6 A / 0.35 A
21.0 V
≤ 20.0 V
Dual GFCI
452 x 208 x 166
17.8 x 8.2 x 6.5
9.8 / 22
2 years
GP-DC Kit 3
3