Ricoh NC5006 Operating Instructions Manual page 74

COPY
PAPER SELECTION
CJCheck the type of copy paper and touch the keys as shown below.
Key
Usage
Note
Standard paper
Cl
The machine will detect paper of the following size
and direction as standard paper.
-
A4/A3 version
~: A3, B4, A4, B5, A5, B6, A6
D
: A4, B5, A5, B6, 81/2"x 11"
only LT/DLT version
D
: 11" x 17''(DLTL10" x 14", 81/2"x 1l"(LTJ,
8" x 13(F),
51 L?"
x
81@(HLT)
II
:
81/2" x 11"(LT), 51/2° x 81/2''(HLT)
m
Non-standard paper
Cl
If the machine cannot detect the paper size and
direction, the copy image may not be correctly
positioned on the copy paper. Therefore, input the
odd
paper size and direction data by using the user tool
to make of the correct size.
Size
"User Tool - Set Bypass Paper Size"
= page 8-3.
- ~;:$:~:be,s
~ Thick Paper: 104 - 157g/m2 or 28-42 lb.
Thick
Papw
Cl
Make sure to load adhesive labels one sheet at a time
E@Eil
OHP transparencies
0 Check which side should have the copy.
(~ page 3-7)
Cl Do not stack transparencies on the copy tray.
DHP
Whenever a transparency is delivered to the copy
tray, you should remove it immediately.
D
OHP transparencies should be fanned to get the air
between the sheets before loading them.
(METT/NG PAPER ON THE BY-PASS FEED TRAY =
page
3-6)
5-7