Ricoh NC5006 Operating Instructions Manual page 133

SETTING THE PROJECTOR IN POSITION
SETTING
THE
PROJECTOR IN POSITION
IJ Do not touch to the fresnel lens or the glass of the mirror unit. Fingerprints or dirty parts might appear on the
copy. If the fresnel lens becomes dirty, wipe it. (= page 10-23)
1.
Insert the
plug
of the projector into the
wall outlet.
~ Read the notes regarding the power cord.
(I= inside page or the front cover)
2. Turn on the main switch of the projec-
tor.
3. Open the lens cover of the projector.
Cl Inside the cover, there are two pins to
position the mirror unit.
4.
Place the mirror unit so that the unit's
position holes fit over the projector's
positioning pins.
~ Please be careful not to scratch the ex-
posure glass when setting the mirror unit
on it.
5.
Slide the release lever of the mirror
unit in the direction of the arrow and
open the cover of the mirror unit.
10-6