Ricoh NC5006 Operating Instructions Manual page 49

4.
While pressing the left guide release
lever, slide the left guide to the paper
size you want to use.
Cl Make sure that the release lever is locked
in the correct position,
5.
Select the paper size by adjusting the
paper size selector on the rear side of
the tray.
6. Load Paper.
Cl The paper stack must be flush with the
right side of the tray,
~ Do not stack paper over the limit mark.
Cl Make sure to read the notice on the pack-
age showing the front copy side. The
copy side should be loaded down.
7.
Push the tray in until it stops.
~ Push the tray gently; otherwise the paper
guides might move, possibly leading to
paper being in the wrong position and to
paper scewing.
3-9