Ricoh NC5006 Operating Instructions Manual page 135

PREPARING FOR COPYING
Selecting The Base Film (If Needed)
D When you use negative film for copying, use that film's appropriate base film for shading.
1.
2.
3.
Confirm the manufacturer, model
name, and ASA rating of the film you
want to use.
Select a base film suitable for the film
to copy.
c1
c1
The following base film slides have been
prepared as accessories.
*1
For FUJICOLOR SUPER HG-1OO
9 For AGFA XRG-100
9 For KODACOLOR GOLD-100
*1 is a re~istered trademark of FUJI
PHOTO CdMPANY LIMITED.
*2 is a registered trademark of AG-
FAGEVAERT AG.
*3 is a registered trademark of EASTMAN
KODAK COMPANY,
IJ If you use film that does not have suitable
base film, you should make the base film
yourself (u= page 10-21 .).
Open the film strip holder and set the
base film in the film strip holder.
c!
IJ
n
The base film must be set sideways in the
strip holder,
There is no difference between both sides
of the base film.
You can set the negative strip film at the
same time. (= page-l O-9 "Se#ing Fi/ms h
The Ho/det')
4. Close the holder and lock it as shown
in the illustration.
1.//-
10-8