Ricoh NC5006 Operating Instructions Manual page 140

1.
2.
3.
4.
5.
6.
Set the base film and film str.i~ in the
holder. (= base film: pagel O-8, film
strip: page 1O-9)
Open the film cover and while pressing
the holder lever to the right, insert the
film strip holder slightly to the right slot.
Insert the holder until the M mark is
placed as shown in the illustration.
Insert the "N" (Negative) filter (= page
10-7) in the left slot as shown in the
illustration.
IJ Be careful to insert the filter as shown, not
the other way around.
IJ Before going to the next step, make sure
that the fresnel lens is lowered in position.
Touch the Shading key.
~ The copier will start shading automat-
ically.
Adjust the holder by sliding it up and
down to position the correct frame for
copying.
I Shading I
10-13