Programs; Registering Frequently Used Setting - Ricoh Printer/Scanner Unit Type 8000 Operating Instructions Manual

Programs

You can register frequently used settings in the machine memory and recall
them for future use.
Note
❒ You can register up to 10 programs for the scanner mode.
❒ Programs are not deleted by turning the power off or by pressing the {Clear
Modes} key unless the content is deleted or newly registered.
❒ The following settings can be registered to programs: Scan Settings, 1 Sided/2
Sided Original, Top to Top/Top to Bottom, skip scanning back side of the last
page, Divide, Original Orientation, File Type, Batch/SADF, Store File, Pre-
view, and Reception Notice.
❒ Setting made on the simplified display cannot be registered to a program.

Registering Frequently Used Setting

To register frequently used settings in a program:
A
On the initial scanner screen, make the settings you want to register in a
program.
B
Press the {Program} key.
C
Press [Program].
AMG004S
Programs
6
139