Changing A Registered Program - Ricoh Printer/Scanner Unit Type 8000 Operating Instructions Manual

Changing a Registered Program

To change the settings registered to a program:
A
Press the {Program} key.
B
Press [Recall].
C
Press the number of the program you want to recall.
D
Change settings of the program.
E
Press the number of the program you want to recall.
F
Press the {Program} key.
G
Press the number of the program whose settings you changed or the num-
ber of a different program in which you want to register the changed set-
tings.
H
If you select a program that is already registered, a confirmation message
appears. To overwrite the program, press [Yes].
If you select a new program number, you can omit this step. Proceed to the
next step.
I
Enter a program name.
J
Press [OK].
If overwritten, the registered program is deleted.
The new program name appears briefly, and then the initial screen reappears
after a moment.
Programs
6
141