Table of Contents
Advertisement
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
See
Dimmer Modes
for a description of the different run modes.
Static Mode
The Static mode allows for permanent dimmer and strobe presets without a DMX controller.
1.
Go to the STATIC main level.
2.
Set the dimmer value as desired (0–100).
Master/Slave
The Master/Slave mode allows a group of Ovation ED-200WW products (the slaves) to simultaneously
duplicate the output of another Ovation ED-200WW (the master) without a DMX controller.
To set each of the slaves:
1.
Go to the RUNMODE main level
2.
Select SLAVE.
Set the master in STATIC mode.
•
The master is the one that runs in STATIC mode.
•
Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Mode Setting
This option determines whether a product operating in Static mode will output master information through
its DMX ports.
1.
Go to the SETTING main level.
2.
Select the MODE SETTING programming level.
3.
Select SELF (no master/slave output) or MAST (outputs master information to slave products).
Page 12 of 28
Ovation ED-200WW User Manual Rev. 1
Operation
Advertisement
Table of Contents
