Menu Map - Chauvet Ovation ED-200WW User Manual

Operation

Menu Map

Main Level Programming Levels
STATIC DIMMER
RUNMODE
POWER
MODE
ADDRESS
KEY
DIMMER
CURVE
PERFORM
SLOCK
SETTING
PERSONALITY
DMX ERROR
RESET
MODE
SETTING
PWM
VERSION
INFO
RDM
Ovation ED-200WW User Manual Rev. 1
0–100
DMX512
SLAVE
DMMR
SENS
575W
750W
001–512
ON
OFF
OFF
DIM1
DIM2
DIM3
DIM4
OFF
CURVE1
CURVE2
CURVE3
LIVE
STUDIO
ON
OFF
UNO
DOS
STD.P
SAVE
BLACK
Pass code:
SELF
MAST
600Hz
1200Hz
2000Hz
2400Hz
6000Hz
18000Hz
25000Hz
V_ _
UID _ _ _ _ _
LABEL _ _ _ _ _
Description
Manual control of output
Sets the mode to DMX control
Sets the mode to master/slave
Sets the mode to dimmer control, which turns
off data input
Automatically chooses between dimmer and DMX
Matches output to 575 W incandescent fixture
Matches output to 750 W incandescent fixture
Sets the starting address
Sets the key lock (passcode mode)
Linear dimmer
Slow (DIM4) to fast (DIM1) dimmer speeds.
For best performance while using on a
dimmer, set this to DIM4.
No dimmer curve
Large (CURVE3) to small (CURVE1) dimmer
curves. For best performance while using on
a dimmer, set this to CURVE3.
Balances LED cooling using fans and output
power level
Maintains LED cooling by limiting power level
SETTING menu level access lock
1-channel: dimmer
2-channel: 16-bit dimmer
3-channel: 16-bit dimmer, strobe
Continues last command upon loss of DMX
Product blacks out upon loss of DMX signal
Resets product to factory defaults
No DMX output from product in standalone
Sends DMX output in standalone mode
Sets the Pulse Width Modulation frequency
Displays product firmware version
Displays product UID for RDM
Displays product label for RDM
Page 11 of 28