Table of Contents
Advertisement
DMX Values
5Ch
Channel
Function
1
Dimmer
2
Strobe
3
Auto Programs
4
Auto Speed
5
Dimmer Speed
2Ch
Channel
Function
1
Dimmer
2
Strobe
1Ch
Channel
Function
1
Dimmer
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Static Mode
The Static mode allows for permanent dimmer, zoom, and strobe presets without a DMX controller.
Auto Programs
Auto programs allow for dynamic blinder effects without a DMX controller.
1.
Go to the Auto Show main level
2.
Select the desired auto program (Auto 1–4).
3.
Select the desired speed (1–100)
The auto programs cannot be edited.
Master/Slave
The Master/Slave mode allows a group of Ovation F-55WW products (the slaves) to simultaneously
duplicate the output of another Ovation F-55WW (the master) without a DMX controller.
To set each of the slaves:
1.
Go to the Master/Slave main level
2.
Select Slave.
To set the master:
1.
Go to the Master/Slave main level
2.
Select Master.
3.
Select a static setting.
•
The master is the one that runs a program whether in Auto or Static mode.
•
Do not connect a DMX controller to the products configured for Master/Slave operation.
The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Page 9 of 15
Value
000
255
0-100%
000
010
No function
011
255
Strobe, slow to fast
000
010
No function
011
070
Auto Program 1
071
130
Auto Program 2
131
190
Auto Program 3
191
255
Auto Program 4
000
255
0-100%
000
051
Preset dimmer speed from display menu
052
101
Dimmer speed mode off
102
152
Dimmer speed mode 1 (fastest)
153
203
Dimmer speed mode 2
204
255
Dimmer speed mode 3 (slowest)
Value
000
255
0-100%
000
010
No function
011
255
Strobe, slow to fast
Value
000
255
0-100%
Operation
Percent/Setting
Percent/Setting
Percent/Setting
Ovation F-55WW User Manual Rev. 2
Advertisement
Table of Contents
