Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Quick Reference Manual
Advertisement
Table of Contents
Related Manuals for Chauvet EZpar T6 USB
Summary of Contents for Chauvet EZpar T6 USB
- Page 1 User Manual...
-
Page 2: Table Of Contents
Preset Color Mode ......................Custom Color Mixing...................... IRC-6 Infrared Remote Control ..............IRC-6 Operation ......................Master/Slave Mode ..................Configuration (D-Fi USB) ....................11 5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Returns.................... Contact Us ..................EZpar T6 USB User Manual Rev. 2... -
Page 3: Before You Begin
Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetdj.com. -
Page 4: Product At A Glance
Keep this User Manual for future use. If you sell the product be sure that they receive this document. Page 2 of 15 EZpar T6 USB User Manual Rev. 2... -
Page 5: Introduction
The indicator light for the battery turns red while the battery is charging. The indicator light turns green when the battery is done charging. The battery life indicator shows the remaining amount of internal battery life when the menu buttons are inactive. ‘ 100% EZpar T6 USB User Manual Rev. 2 Page 3 of 15... -
Page 6: Setup
3. Setup AC Power The EZpar T6 USB an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s... -
Page 7: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The EZpar T6 USB may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes. -
Page 8: Operation
0–255 Infrared Turns infrared on or off Mode Configuration (DMX) The EZpar T6 USB works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf. Starting Address When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. - Page 9 223 7 Color Snap 255 Sound Control Mode Dimmer 255 0–100% Channel Function Value Percent/Setting 255 0–100% Green 255 0–100% Blue 255 0–100% EZpar T6 USB User Manual Rev. 2 Page 7 of 15...
-
Page 10: Configuration (Standalone)
DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. Automatic Programs To run the EZpar T6 USB in automatic mode, follow the instructions below: Press <MENU> repeatedly until P-- shows on the display. Press <ENTER>. -
Page 11: Irc-6 Infrared Remote Control
Operation IRC-6 Infrared Remote Control The EZpar T6 USB is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode, follow the instructions below: Press <MENU> repeatedly until SEt shows on the display. Press <ENTER> to accept. -
Page 12: Master/Slave Mode
Operation Master/Slave Mode The Master/Slave mode allows a single EZpar T6 USB product (the “master”) to control the actions of one or more EZpar T6 USB products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either Stand-Alone mode or with the IRC-6, while the slave products will be set to operate in Slave mode. -
Page 13: Configuration (D-Fi Usb)
IRC-6 Remote Control Manual Digital Display / Menu Buttons Configuration (D-Fi USB) Set the DMX Personality and DMX address on the EZpar T6 USB. Plug in the D-Fi USB and use the Chart provided to set BOTH: • the Channel, and then •... -
Page 14: Maintenance
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Page 12 of 15 EZpar T6 USB User Manual Rev. 2... -
Page 15: Technical Specifications
Cooling System 104 °F (40 °C) Fan-assisted convection I/O Connector Channel Range 3-pin XLR 3 or 8 Ordering Product Name Item Code UPC Number EZpar T6 USB 03031222 781462215705 EZpar T6 USB User Manual Rev. 2 Page 13 of 15... -
Page 16: Returns
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA number. Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box. -
Page 17: Contact Us
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., United Kingdom, Ireland, Mexico or Benelux, contact the dealer of record. EZpar T6 USB User Manual Rev. 2 Page 15 of 15...
Need help?
Do you have a question about the EZpar T6 USB and is the answer not in the manual?
Questions and answers