Querying The Sun2000L Information - Huawei SUN2000L User Manual

SUN2000L-(2KTL-5KTL)
User Manual
Figure 7-13 Operation console
----End

7.4.2 Querying the SUN2000L Information

To query the SUN2000L information, choose Device info from the Operation console
screen.
Querying Power Curves
You can query the current-day power curve and energy yield.
Issue 02 (2017-12-12)

To change the configuration file to be imported, tap Change.
 In the dialog box with Are you sure you want to configure the inverter connected router settings
again, if you tap Confirm, the router configurations saved before will be cleared. If you tap Cancel,
you only have to enter the saved router password.
 After quick setting is complete, tap Switch to Router WiFi to switch to the Available WiFi
networks nearby screen and tap the corresponding router WiFi connection to switch to the router
WiFi network.
 To connect to the router WiFi network from the mobile phone system after router parameters are
successfully set, you need to log out of the app and log in again.

After the management system is successfully connected, the SUN2000L will report the SN and
installer registration code. If the connection fails, another connection attempt will start after 10
seconds. The installer registration code is generated by the SUN2000L automatically and is used for
the installer to register with the management system and manage the inverter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
69