Huawei SUN2000L User Manual page 103

SUN2000L-(2KTL-5KTL)
User Manual
Figure 7-40 Feature parameters
The feature parameter values vary with the grid code. The displayed values prevail.
Table 7-10 Description of feature parameters
Parameter
MPPT multi-peak scanning
MPPT multi-peak scan
interval (min)
Issue 02 (2017-12-12)
Description
When the SUN2000L is
used in scenarios where PV
strings are obviously
shaded, enable this function.
Then the SUN2000L will
perform MPPT scanning for
all PV strings at regular
intervals to locate the
maximum power.
The scan interval is
specified by MPPT
multi-peak scan interval.
Specifies the MPPT
multi-peak scanning
interval.
This parameter is displayed
only when MPPT
multi-peak scanning is set
to Enable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Value Range
 Disable
 Enable
[5, 30]
96