Huawei SUN2000L User Manual page 118

SUN2000L-(2KTL-5KTL)
User Manual
Table 7-16 Description of the parameters on the Connecting to the management system screen
Parameter
Management system status
SN
Registration code
IP address
Port
Encrypted transmission
Certificate replacement
Issue 02 (2017-12-12)
Description
Display the status of the
Management system.
SUN2000L equipment SN.
The installer registration
code is generated by the
SUN2000L automatically
and is used for the installer
to register with the
management system and
manage the inverter.
Specifies the IP address or
network address used for
connecting to the
management system.
Specifies the number of the
port on the management
system to which the
SUN2000L connects over a
network protocol. Set this
parameter according to the
requirements of the accessed
management system.
If this parameter is enabled,
data is transmitted between
the SUN2000L and the
management system after
encrypted with SSL.
If this parameter is disabled,
data is transmitted between
the SUN2000L and the
management system as
plaintext, which poses
security risks.
If encrypted connection to a
third-party NMS is required,
replace the client certificate
provided by the third party.
You can select the
appropriate root certificate,
customer certificate, or key
file and enter the private key
password. After the
replacement is complete,
connect the SUN2000L to
the management system and
check the correctness of the
certificate.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
Value Range
N/A
N/A
N/A
N/A
[0, 65535]

Disable

Enable
N/A
111