Huawei SUN2000L User Manual page 70

SUN2000L-(2KTL-5KTL)
User Manual
The way of connecting the SUN2000L to the router is as follows:


Procedure on the Android System
The app allows for connecting to the SUN2000L in the following two ways. Select either way
based on site requirements. After the connection succeeds, the Inverter list screen is
displayed. If connecting to the SUN2000L or router WiFi network from the app fails, try to
connect to the WiFi network from your mobile phone. To connect to the router over WiFi
from the mobile phone system, ensure that you have logged out of the app.

Issue 02 (2017-12-12)
The installer taps Quick setting (see
7.4.6 Comm Config for details).
The user taps Set (see 7.5.6 Settings
 If the WiFi signal is weak, you will be prompted to try again multiple times. Follow the instructions.
 To exit the app, tap Exit on the Inverter list screen.
Method 1: The mobile phone connects to the SUN2000L directly.
Run the app, tap the WiFi name corresponding to the SUN2000L, and enter the WiFi
password to connect to the WiFi network. Use the initial password Changeme upon first
login. To ensure account security, change the password immediately after login.
The name of the connected SUN2000L WiFi network is represented by SUN2000L-its serial number
(SN). The SN is available on the label attached to the side of the SUN2000L.
Figure 7-5 Mobile phone connecting to the SUN2000L directly
If you log in for the first time and the initial SUN2000L WiFi password is not changed,
you can scan the WiFi login QR code on the side of the SUN2000L to connect to the
SUN2000L WiFi network.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Operations on the Local FusionHome App
7.4.4 Quick Setting for details) or Comm config (see
for details).
63