Installing The Ac Output Power Cable - Huawei SUN2000L User Manual

SUN2000L-(2KTL-5KTL)
User Manual
(D) Hydraulic pliers
Step 2 Connect the PE cable.
Ensure that the PE cable is connected securely.
Figure 5-4 Connecting a PE cable
----End

5.3 Installing the AC Output Power Cable

Prerequisites
An AC switch must be installed on the AC side of the SUN2000L to ensure that the
SUN2000L can be safely disconnected from the power grid.
Issue 02 (2017-12-12)

The PE point at the AC output port is used only as a PE equipotential point, and cannot substitute for
the PE point on the enclosure.
 To enhance the corrosion resistance of a ground terminal, apply silica gel or paint around the
terminal after connecting the ground cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(E) Heat gun
5 Electrical Connections
39