Memory Card Reader Board - HP Pavilion 15 Maintenance And Service Manual

Memory card reader board

Description
Memory card reader board
Memory card reader board cable
Memory card reader board cable on models equipped with GTX graphics
Before removing the memory card reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the memory card reader board:
1. Disconnect the cable from the ZIF connector on the memory card reader board (1).
2. Remove the Phillips M2.0×4.0 screw (2) that secures the board to the computer.
3. Remove the board from the computer (3).
Remove the memory card reader board on models equipped with GTX graphics:
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 35).
32).
Spare part number
L23890-001
L25889-005`
L23891-001
L41586-001