Feature Configuration With Alarm Server - Alcatel-Lucent 8262 Installation Manual

8262 DECT Handset - Alarms: Geolocation and notification

1.3 Feature configuration with alarm server

To access the configuration menus of the various features:
1.3.1 Alarm settings menu
This menu allows you to activate, deactivate and set parameters.
Alarms Trigger:
The Wireless Handset is able to warn about a critical situation for isolated worker.

Emergency call: this menu allows to program the call number dialed in case of emergency
call. The emergency call is activated by using red button key (hold or twice) or OK key
(hold).

Mandown: this menu allows activation of the "Mandown" alarm feature. This feature
allows triggering an alarm when the set detects a loss of verticality during a configurable
time delay.

No movement: this menu allows activation of the "No movement" alarm feature. This
feature allows triggering an alarm when the set does not detect any movement during a
configurable time delay.

Shock: this menu allows activation of the "Shock" alarm feature. This feature allows
triggering an alarm when the set detects an abnormal shock.

Pull cord: this menu allows the user to trigger an alarm by a single wide handset movement
that will disengage a part from the handset, the other part of the cord being attached to
the user clothes.

Delay time: this parameter is a time delay where the handset is in an alarm condition
before triggering the prealarm phase.

Prealarm time: this parameter defines the time delay of the prealarm. This prealarm phase
precedes the alarm triggering. A signal and specific display warns the user that an alarm is
going to be triggered. At this step, the user can stop the alarm process.

User delay: this parameter defines the time before the set can get in alarm condition after
the user stops an alarm process during the prealarm phase.

Inactive dialing time: this parameter defines the time before the set can get in alarm
condition after dialing a number is interrupted more than the inactive dialing time value.
8AL90324ENAAed01

Access MENU.

Alarm Set.
Access to Alarm settings menu.

If configured. Enter device PIN code (The default is 0000).

Ok.
Mode: activate or deactivate the option.
Sett: set feature parameters.
8/22