Configure The Parameter: Delay Time; Onfigure The Parameter : Prealarm Time; Configure The Parameter: User Delay - Alcatel-Lucent 8262 Installation Manual

8262 DECT Handset - Alarms: Geolocation and notification

2.6 Configure the parameter: Delay time

This parameter is a time delay where the handset is in an alarm condition before triggering the
prealarm phase.
This phase does not apply to the feature: Emergency call.
2.7 Configure the parameter: Prealarm time
This parameter defines the time delay of the prealarm. This prealarm phase precedes the alarm
triggering. A signal and specific display warns the user that an alarm is going to be triggered. At
this step, the user can stop the alarm process. This phase does not apply to the feature: Emergency
call.

2.8 Configure the parameter: User delay

This parameter defines the time before the set can get in alarm condition after the user stops an
alarm process during the prealarm phase.
This phase does not apply to the feature: Emergency call.
8AL90324ENAAed01

Access MENU.

Access to Alarm settings menu (password).

Alarms Trigger

Delay time

Select the desired duration (off, 5, 10, 20, 30, 60, 90, 120 or 240 seconds).

Access MENU.

Access to Alarm settings menu (password).

Alarms Trigger

Prealarm time

Select the desired duration (off, 5, 10, 20, 30, 60, 90, 120 or 240 seconds).

Access MENU.

Access to Alarm settings menu (password).

Alarms Trigger

User delay

Select the desired duration (off, 5, 10 or 15 minutes).
17/22