Alarm Notification Call; Introduction; Configuration - Alcatel-Lucent 8254 User Manual

Alarm notification call

6 Alarm notification call
This feature is only available on the 8254 DECT Handset.

6.1 Introduction

The 8254 DECT Handset is able to receive a notification call sent by an alarm server. Notification calls
have the highest priority over any other calls. This is very useful for urgent calls, such as a patient who is
trying to reach medical staff, for example.

6.2 Configuration

To configure your handset to receive notification call, please contact your administrator or consult:
AL9032 ENAB " 2 / 2
Manual".
•
Configure the alarm server.
These parameters relate to normal, urgent, and very urgent alarms as well as automatic handsfree
mode and server identification check.
•
Configure the rings of incoming notification call.
This menu allows you to assign ringtones, volumes, and ring types (off, ring, vibrate and ring,
vibrate, beeps) to alarm levels sent by the alarm server (normal, urgent, very urgent) to avoid
confusion with other calls.
•
Activate or deactivate the coverage warning.
When the alarm mode is active and the coverage warning activated, the phone will display a pop-up
screen when the phone goes out of the coverage area.
If the coverage warning setting is enabled (ON) it will alert the user that it is not possible to ensure
this service if the Wireless DECT handset goes out of coverage range.
•
Change the alarm password.
•
Reset all alarm parameters.
8AL90386ENABed01
/ 262/ 262Ex DECT Handset Alarms: Geolocation and notification Installation
44 /76