Considered Standards; Appendix B - Technical Specifications - WEG CFW300 User Manual

8.2.1 Considered Standards

Safety standards UL 508C - power conversion equipment
„
UL 840 - insulation coordination including clearances and creepage distances for electrical
„
equipment
EN61800-5-1 - safety requirements electrical, thermal and energy
„
EN 50178 - electronic equipment for use in power installations
„
EN 60204-1 - safety of machiner y. Electrical equipment of machines. Part 1: general requirements
„
Note: the final assembler of the machine is responsible for installing a safety stop device and a
supply disconnecting device
EN 60146 (IEC 146) - semiconductor converters
„
EN 61800-2 - adjustable speed electrical power drive systems - part 2: general requirements
„
Rating specifications for low voltage adjustable frequency AC power drive systems
„
Electromagnetic EN 61800-3 - adjustable speed electrical power drive systems - part 3: EMC product standard
„
compatibility including specific test methods
(EMC) EN 55011 - limits and methods of measurement of radio disturbance characteristics of industrial,
„
standards scientific and medical (ISM) radio-frequency equipment
(*)
CISPR 11 - industrial, scientific and medical (ISM) radio-frequency equipment - electromagnetic
„
disturbance characteristics - limits and methods of measurement
EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques
„
- section 2: electrostatic discharge immunity test
EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques
„
- section 3: radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques
„
- section 4: electrical fast transient/burst immunity test
EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques
„
- section 5: surge immunity test
EN 61000-4-6 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques
„
- section 6: immunity to conducted disturbances, induced by radio-frequency fields
Mechanical EN 60529 - degrees of protection provided by enclosures (IP code)
„
standards UL 50 - enclosures for electrical equipment
„
IEC 60721-3-3 - classification of environmental conditions
„
(*) Compliance with standards upon installation of external RFI filter. See
on page 9.
Table 8.2: Considered standards
Technical Specifications
Chapter 3 INSTALLATION AND CONNECTION
CFW300 | 33