Setup - ProLights Eclipse FC User Manual

16

3.15 SETUP

You can change the parameters for the device by following these steps:
Temperature
Through the Max Temperature function can be displayed the temperature inside the fixture, near the lamp.
• Press the button MODE so many times until the display shows SETUP, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Max Temp and press the ENTER but-
ton.
Screen
You can change the following parameters related to the display, following the same procedure:
• Press the button MODE so many times until the display shows SETUP, then press the button ENTER.
• Select Screen through the buttons UP/DOWN, then press the button ENTER.
• Press UP/DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
- Back Light - Backlight display Auto Off. This feature allows you to automatically turn off the backlight
after a specified time that you can set using the arrow buttons. To have the display or set a value of
Off~99 min to turn off the display after the amount of time you choose.
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select YES to activate or NO to dis-
able this function.
• Press the ENTER button to confirm your choice.
• Press the MODE button repeatedly to exit the menu and save changes.
Fixture
Fans Mode - Select this function to set the fans operation mode.
• Press the button MODE so many times until the display shows SETUP, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Fixture and press the ENTER button
to enter the next menu (Fan Mode).
• Use the UP/DOWN button to select the option proposed (Auto Speed/High Speed) and press the ENTER
button to confirm the setting.
• Press the MODE button to go back and save changes.
LED Frequency To adjust the frequency of the LEDs.
• Press the button MODE so many times until the display shows SETUP, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Fixture and press the ENTER button
to enter the next menu (LED Freq).
• Select the frequency (600Hz - 1200Hz - 2000Hz - 4000Hz - 25kHz) using the UP/DOWN buttons.
• To confirm, press the ENTER button.
• Press the MODE button to go back
3.16 ADVANCED
To enter in advanced functions mode, proceed as follows:
Dimmer
• Press the button MODE so many times until the display shows ADVANCED, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Dim curve and press the ENTER but-
ton
• Press the button UP/DOWN to select Dimmer1 - Dimmer2 - Dimmer3 - Dimmer4.
ECLIPSEFS