Table of Contents
Advertisement
• Press ENTER button to store.
• Press the MODE button to go back or to meet the waiting time to exit the setup menu.
Calibration
Select this function to calibrate and adjust code and channel:
• Press the button MODE so many times until the display shows ADVANCED, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Calibration and press the ENTER
button.
• Use the UP/DOWN button to select the option proposed (Code/CHxx) and press the ENTER button to
confirm the setting.
• Press the MODE button to go back and save changes.
Reload Def
Select this function to reload all info:
• Press the button MODE so many times until the display shows ADVANCED, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select Reload Def and press the ENTER
button.
• Press the UP/DOWN button to select On or Off, then press the ENTER button to confirm.
3.17 FIXTURE INFORMATION
To view all the information on the device, proceed as follows:
• Press the button MODE so many times until the display shows INFORMATION, then press the button EN-
TER.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
- Time Info. - Through the Time Info function you can display the operating time of the projector.
- Temperature - Through the Temperature function can be displayed the temperature of sensor.
- Software Version - Through Software Version function you can display the currently installed software
version.
• Press the MODE button to exit the menu.
ECLIPSEFS
17
Hide quick links:
Advertisement
Table of Contents
