ProLights Eclipse FC User Manual page 15

port RDM. The number and type of RDM parameters depend on the RDM controller (not included) is used.
• Press the button MODE so many times until the display shows CONNECT, then press the button ENTER.
• Press the UP/DOWN button to scroll through the menu, then select RDM ID and press the ENTER button.
• Press UP/DOWN button to scroll through the menu, then select Password and press ENTER to confirm.
• Use the arrow keys to enter the password 050 and press ENTER to confirm.
• Once you have entered your password, you can set the PID Code, necessary to control the unit with
the RDM protocol. Press the UP/DOWN button to scroll through the menu, select PID Code and press
ENTER to confirm.
• Use the arrow keys to enter the PID Code, then press the ENTER button to confirm your choice.
• Press the MODE button to exit the menu and save changes.
ECLIPSEFS
13