Functions And Settings; Operation; Basic Setup; Charging The Battery - ProLights SMARTTUBE32 User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

The SMARTTUBE32 comes with a non-user-serviceable lithium-ion battery for cable-free operation. Switch
on the SMARTTUBE32 with the ON/OFF button. The unit is ready for operation and can be operated via a
DMX controller or it independently performs its show program in succession. After operation, switch off
the unit with the power switch.
ATTENTION
Before applying power to a fixture, check that the source voltage matches the fixture's requirement.
This information is located on the power adaptor that is included with your unit.

3.2 BASIC SETUP

The SMARTTUBE32 has a LED display and 4 buttons for access to the functions of the control panel (fig. 3).
MENU
ENTER
MENU
Used to access the menu or
to return a previous menu
option

3.3 CHARGING THE BATTERY

To recharge SMARTTUBE32, connect the connection cable of the power unit with the charge battery con-
nector. Plug the power unit into your outlet (100-240V ~ /50-60Hz).
The charging time are 4 hours and autonomy is 10 hours (color change mode) or 6 hours (permanent
white full-on).
SMARTTUbE32
UP
Button to select the values
in ascending order of the
function
DOWN
Button to select the values
in descending order of the
function
UP
DOWN
ENTER
Used to select and store the
current menu or confirm the
current function value or
option within a menu
Fig.3 - Functions of the buttons
7