Functions And Settings; Operation; Recharge; Basic Setup - ProLights Z7SPOT User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Switch on the Z7SPOT with the power switch (If the battery charge is very low, connect the supplied main
cable to a socket (100-240V~/50-60Hz). The unit is ready for operation and can be operated via a DMX
controller or it independently performs its show program in succession.
After operation, switch off the unit with the power switch.
NOTE - The indicators on the display, show how much battery life remains available.

3.2 RECHARGE

To recharge Z7SPOT with the IP POWER CONNECTOR (PowerCON TRUE IN), plug the power cable into a
mains socket (100-240V~/50-60Hz). Otherwise use IP CONNECTOR for recharge operations through mag-
netic fast-charge in case.
The charging time are 6 hours (max) and autonomy is 16 hours (color change mode) or 8 hours (perma-
nent white full-on).
NOTE - The battery charges whenever the product is plugged into a power source. If the product is plugged
in and not in operation, make sure the ON/OFF switch is in the OFF position.

3.3 BASIC SETUP

The Z7SPOT has a black OLED display and 4 buttons for access to the functions of the control panel (fig.4).
MENU
Used to access the menu or
to return a previous menu
option
Z7SPOT
Mode
Enter
UP
Navigates downwards through
the menu list and increases
the numeric value when in a
function
Down
DOWN
Navigates upwards through
the menu list and decreases
the numeric value when in
a function
Up
ENTER
Used to select and store the
current menu or confirm the
current function value or
option within a menu
Fig.4 - Functions of the buttons
7