Settings For Temperature Monitoring; 8.2.3.1 Configuring The Analogue Value For Temperature - TESTO 6446 Instruction Manual

Settings for temperature monitoring

8.2.3
Configuring limit monitoring with OUT2
8.2.3.1
SEL2
TEMP
OU2
SP2
rP2

8.2.3.1 Configuring the analogue value for temperature

SEL2
TEMP
OU2
ASP
AEP
36
select and
set.
select and set the switching function.
Hno = hysteresis function/NO contact
Hnc = hysteresis function/NC contact
Fno = window function/NO contact
Fnc = window function/NC contact
select and set value with which the output switches.
select and set value with which the output switches back.
select and
set.
select and set the function.
I = temperature-proportionate current signal (4 to 20 mA)
select and set value with which the minimum value is output.
select and set value with which the maximum value is output.