Parametrising Scenarios; Settings For Flow Monitoring - TESTO 6446 Instruction Manual

Parametrising scenarios

8.2

Settings for flow monitoring

8.2.1
Configuring limit monitoring with OUT1
8.2.1.1
Uni
select and specify unit of measurement (
OU1
select and set the switching function.
SP1
select and set value with which the output switches.
rP1
select and set value with which the output switches back.
Configuring limit monitoring with OUT2
8.2.1.2
Uni
select and specify unit of measurement (
SEL2
select and set.
FLOW
select and set the switching function.
OU2
Hno = hysteresis function/NO contact
Hnc = hysteresis function/NC contact
SP2
select and set value with which the output switches.
rP2
select and set value with which the output switches back.
Hno = hysteresis function/NO contact
Hnc = hysteresis function/NC contact
Fno = window function/NO contact
Fnc = window function/NC contact
Fno = window function/NO contact
Fnc = window function/NC contact
see 8.2.4).
see 8.2.4).
33