Configuring the analogue value for flow rate
8.2.1.3
Uni
SEL2
FLOW
OU2
ASP
AEP
Settings for consumption quantity monitoring
8.2.2
Configuring quantity monitoring through pulse output
8.2.2.1
OU1
ImP
ImPS
ImPR
YES
Configuring the quantity monitoring using the preset counter
8.2.2.2
OU1
ImP
ImPS
ImPR
NO
34
select and specify unit of measurement (
select and
set.
select and set the function.
I = flow-proportionate current signal (4 to 20 mA)
select and set value with which the minimum value
is output.
select and set value with which the maximum value
is output.
select and
set.
select and set the flow volume with which 1 pulse is
emitted each time (
select and
set.
> Pulse repetition is active. Output 1 emits a counting pulse
each time the value set in ImPS is reached.
select and
set.
select and set the flow volume with which output 1 is
activated (
see 8.2.6).
select and
set.
> Pulse repetition is not active. The output switches ON when
the value set in ImPS is reached. It remains switched until the
counter is reset.
see 8.2.6).
see 8.2.4).