5-Wire Pin Assignment (Accessory) - TESTO 6446 Instruction Manual

5.8.1.1 1 x pulse output, 1 x analog output (condition on delivery)
The OUT1 output is used as a PNP signal output (pulse) and the OUT2
output is used as an analog output. This is the configuration in which the
sensors are delivered.
2 x pulse output
5.8.1.1
Both of the available OUT1and OUT2 outputs are each used as a PNP
signal output (pulse).

5-wire pin assignment (accessory)

5.8.2
If the optional connecting cable for electrical isolation is used (
4.2.2), then the following assignments apply.
Pin no. Wire colour
1
2
3
4
5
Assignment
Brown +L (19 to 30 V DC) sensor supply
Pink + potential-free pulse output (collector) OUT1
White - potential-free pulse output (emitter) OUT1
Green OUT2
Black 0 V DC (GND)
Pin = designation (wire colour)
1= BN (brown)
2= WH (white)
3 = BU (blue)
4 = BK (black)
see
25