TROUBLESHOOTING
10
Replacing damaged parts
10.1
WARNING
To order spare parts please contact our Service team, either by phone on
+49 7653 6810 or email to info@testo.de.
Replacing O-rings and sealing rings
10.2
• Keep the sealing surfaces clean.
• Remove any adhered residues from time to time.
• In the event of leakage, contact your supplier.
ATTENTION
Return shipment
10.3
In case of repair, please send the sensor to the supplier in its original
packaging.
Disposal
10.4
The sensor design takes environmental compatibility into account in
the best way possible. According to the EU directive 2002/96/EC,
compressed air meters must be conveyed to a separate collection
point for electrical and electronic devices or may be sent to the
supplier for disposal. They may not be added to the unsorted
municipal waste.
Please observe the local regulations.
If faults cannot be corrected, the products must be taken
out of operation and be safeguarded from inadvertent
commissioning. Replace all damaged parts immediately.
Damages to the compressed air meter that affect the pressure
integrity may only be remedied by authorised personnel.
After each repair, the technical data of the specifications must
be checked by qualified personnel, e.g. by means of a pressure
test.
Danger of the medium escaping! Replacement of the seals
may only be performed by authorised personnel.
45