KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
8) Alignment of Interchangeable Cores:
If an IC Core is used, center the interface toward the
•
bottom.
9) Tighten the Four Screws in the Baseplate:
Tighten the four baseplate screws in the fol-
•
lowing order:
> Tighten a and b until snug.
> Tighten c and d until snug.
> Fully tighten a and b.
> Fully tighten c and d.
> Check all four screws to make sure that
all four are completely tight.
10) The Dead Latch's "Critical Edge:"
For clarity purposes only, photo on the
•
right is a view of deadlatch with escutch-
eon removed.
Edge (a) is referred to as the dead latch's
•
"critical edge."
IMPORTANT: In the next step, the "critical
edge" on deadlatch will have to be lined up with
hole (b) in baseplate. See Position the Dead
Latch's Set Screw Hole: on page 10
57040-E
c
Page 9
d
a
b
b
a
04-2007