KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
24) Secure the Lever Cover:
Secure lever cover with two Phillips head screws.
•
25) What To Do With the Adams Rite
Retrofit Installation -
Remove face plate (a).
•
Loosen key cylinder set screw (b).
•
Remove key cylinder (c).
•
Remove any Adams Rite® trim if present.
•
NOTE: Key cylinder can be reused if refitted with
the proper cam. See Cams For Mechanical Over-
ride Cylinder: on page 5.
New Installation -
Using the Adams Rite® installation instruc-
•
tions, install the Adams Rite® latch mecha-
nism (d).
DO NOT INSTALL KEY CYLINDER (c).
•
DO NOT INSTALL FACE PLATE (a).
•
57040-E
Product:
®
c
Page 16
a
b
04-2007
d