Advertisement
KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
16) Verifying the Interface Hand:
Photo on right shows how your interface should look for a
•
RHR installation. Note direction of hook (a) in respect to
latch (b).
NOTE: Hook can be reversed.
Verify the Interface Hand (continued):
Photo on right shows how the assembled interface should
•
look for a LHR installation. Note direction of hook (a) in
respect to latch (b).
NOTE: Hook can be reversed.
If the hook on your interface has to be reversed, continue with, Remove Retaining Ring: on
page 13. Otherwise, skip to, Orientation of the Interface: on page 18.
17) Remove Retaining Ring:
Using a small, flat blade screwdriver, pry off retaining ring
•
(a) from interface (b).
NOTE: Do not discard retaining ring.
57040-E
Page 13
b
a
a
b
04-2007
b
a
Advertisement
