KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
If this is a retrofit installation, continue with, Prepare the Door: on page 17. Otherwise, skip to,
Orientation of the Interface: on page 18.
26) Prepare the Door:
Apply the self-adhering transparent template onto door as fol-
•
lows:
> Line up template with existing cylinder hole.
> Vertical guidelines must be parallel with vertical edges of
door.
NOTE: The vertical lines are for vertical guidance only, Do not over-
lap with edges of door. Make only parallel to door edges.
> If necessary, lift off template and reposition.
Drill and tap holes.
•
NOTE: If optional blind nuts are used, see blind nut installation
instructions (Schlage Lock Company form number: 57057) for cor-
rect hole size and mounting method.
57040-E
Page 17
04-2007