Advertisement
KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
14) Determine Hand:
To determine hand:
Stand on outside of door.
•
Determine which arm the hinges are
•
closest to.
If door is pulled to open, it is
•
"Reverse."
NOTE: All narrow stile trim is "Reverse."
15) Verify Lever / Turnpiece Stop Screw Direction:
Once the handing of the installation is determined, you
may have to change the location of the stop screw in the
baseplate.
To change the location of the stop screw:
Use a 3/32" Allen wrench.
•
For RHR installations:
•
> Refer to photo on the right for stop screw
location (a).
For LHR installations:
•
> Refer to photo on the right for stop screw
location (b) for LHR.
IMPORTANT: Stop screw must be set for proper rota-
tion. This applies to both lever and turnpiece models.
57040-E
Page 12
a
b
04-2007
Advertisement
