KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
11) Position the Dead Latch's Set Screw Hole:
Tilt the trim until you see the "critical
•
edge" align with the larger hole in the
baseplate as shown in photo on right.
Look closely at edge of dead latch's
"critical edge" (a) when doing this.
IMPORTANT: When the dead latch's "critical
edge" is correctly aligned, the dead latch's set
screw hole will likewise be correctly aligned.
Photos A, B and C below illustrate examples of an
incorrectly aligned critical edge. Photo D is an
example of a correctly aligned critical edge.
A
NOT CORRECTLY
ALIGNED
57040-E
B
NOT CORRECTLY
ALIGNED
D
CORRECTLY ALIGNED
Page 10
a
C
NOT CORRECTLY
ALIGNED
04-2007