KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
27) Orientation of the Interface:
From the outside of the door, posts (a) on interface
•
should be pointing at you and hook (b) on interface
should be facing down.
Photo on right shows an interface that is prepared for
•
a LHR installation, but whether you have a LHR or a
RHR installation, the hook on the interface has to go
through the slot (c) at the bottom of the latch mecha-
nism.
28) Insert the Interface:
Keep latch (a) pushed in while inserting the inter-
•
face into cylinder hole.
29) Check the Interface Installation:
Photo on right shows a LHR installation.
Viewed from the inside of the door, this is what the
•
interface should look like within the door when
assembling a LHR installation.
> Observe that hook on interface (a) is on the left
side of the latch mechanism's "finger" (b).
57040-E
Page 18
a
b
04-2007
a
b
c
a