Communication Parameters - Toshiba Tosvert VF-S15 Series Instruction Manual

7. Communication parameters

The settings of communication-related parameters can be changed from the operation panel and
the external controller (computer). Note that there are two types of parameters: parameters whose
settings take effect immediately after the setting and parameters whose settings do not take effect
until the inverter is turned back on or reset.
Com-
munica-
Title Function
tion
Number.
0800 f800 Baud rate
0801 f801 Parity
f802 Inverter number
0802
Communication
0803 f803
time-out time
Communication
0804 f804 time-out action
Communication
f805
0805
waiting time
Setting of master
and slave for
0806 f806
communication
between inveters
Communication
0808 f808 time-out detection
condition
Frequency point
0810 f810
selection
Communication
command point
0811 f811
selection
Communication
command point 1
0812 f812
setting
Communication
command point 1
0813 f813
frequency
Communication
command point 2
0814 f814
setting
Selection of
0829 f829 communication
protocol
Number of motor
f856
0856 poles for commu-
nication
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Adjustment range
3: 9600bps
4: 19200bps
5: 38400bps
0: Non parity
1: Even parity
2: Odd parity
0-247
0.0:Disabled
0.1-100.0s
0:Alarm only
1:Trip (Coast stop)
2:Trip (Deceleration stop)
0.00-2.00
0: Slave (0 Hz command issued in
case the master inverter fails)
1: Slave (Operation continued in
case the master inverter fails)
2: Slave (Emergency stop tripping
in case the master inverter fails)
3: Master (transmission of
frequency commands)
4: Master (transmission of output
frequency signals)
0: Always
1: during communication
2:1+running
0:Disabled
1:Enabled
0-100%
0-fhHz
0-100%
0-fhHz
0: Toshiba inverter protocol
1: Modbus RTU protocol
1:2poles, 2:4poles, - 8:16poles
47
Default
Unit Valid
setting
- 4 After reset.
- 1 After reset.
1 0 Real time
0.1s 0.0 Real time
- 0 Real time
0.01s 0.00 Real time
- 0 After reset.
- 1 Real time
- 0
1% 0
0.01Hz 0.0
Real time
1% 100
0.01Hz 60.0
- 0 After reset.
- 2 Real time
E6581913
Reference
Section
7.1
Section
7.1
Section
7.2
Section
7.3
Section
7.4
Chapter 6
Section 7.3
Section
6.13
Chapter 3
Section 8.1